2014年12月30日星期二

The Specification of APA102 LED CHIP

General Description 
      APA102 is a type ic for the three color RGB Diming control strip and string,This ic 
using the CMOS process to provide three-color RGB LED output driver to adjust the output
with 256 gray scale and 32 brightness adjustment,APA with 2 signal output way , one is 
clock ,another is data, the clock and data is synchronization,
so that the crystal cascade piece of output movement also synchronized.

Feature 
    CMOS process,low voltage ,low consumption 
     Synchronization of two-lane
     Choose positive output or negative RGB three-color LED output  
     8 bit(256 level) color set ,5bit(32 level) brightness adjustment 
     Build-20ma constant current output 
     With self-detection signal build in support for continuous oscillation PWM
     output ,can be maintained static screen
Application 
     LED lamp
      LED Strip ,led pixel module 
      LED billboard  LED screen
PRODUCT  SPECIFICATIONS










PIN Description

NO.
PIN NAME
 I/OFUNCTION
1
   VDD
P
Power is terminal 
  2   VREG
O
4.5V regulator output
  3   CKO
O
Series with the output clock signal 
  4   SDO
O
Series with the output data
  5   VEN
I
Self-test function selection
  6   CSEL
I
Invert the clock signal cascade
  7   POLAR
I
Positive and negative output options
  8   OSCI
I
Oscillator input
  9   SDI
I
Series with the input data
 10   CKI
I
Series with the input clock signal 
 11  REXT
I
Constant current source to adjust side 
 12   VSS
P
Power supply negative terminal 
 13    G
O
Green LED output
 14    R
O
Red LED output
 15    B
O
Blue LED output 
(Block diagram)



(Absolute Maximum Rating)
Supply volage --------------   -0.3-6.0V
Input voltage---------------- VSS-0.3 to VDD +0.3V
Operating temperature----------------  -40 to +70℃
Storage temperature-------------------  -50 to +125℃
Note: Stress above those listed may cause permanent damage to the devices

(Electrical Characteristic)
Symbol
ParameterConditionMin.Typ.MAXUnits
VDD
Supply Voltage5.05.5  V
VIH
Input High Voltage0.7VDDVDD+0.3  V
VH
Input Low VoltageVSS-0.30.3VDD  V 
LOL
Sink Current Voltage(RGB)VDD=5V,VOL>1V  22.524.526.5 mA
RIN
Pull HighVDD=5V570 kΩ
VREG
Regulator Voltage(VREG)VDD=5V  4.44.54.7 V
FOSC
Oscillator Frequency   8001200 KHz

(Function Description)
(1) cascading data structure
   Tabdem N-LED
     



Global bit:5 bit (32 level) brightness setting,while controlling R,G,B three-color constant current output value,if set the global bit for the 10000( 16/31 ) is 
the output current is half again the original PWM settings
  DATA
MSB←→LSB
Driving Current
00000
0/31
00001
1/31
00010
2/31
·····

11110
30/31
11111
31/31(max)

PWM input and output signals Relations


Data 
MSB--
Duty Cycle
00000000
0/256(min)
00000001
1/256
00000010
2/256
········

11111101
253/256
11111110
254/256
11111111
255/256(max)
 (2). The number of pixel per second sent to the CKI frequency (FCKI) minus the Start 
Frame bit divided by the number 40 the number of LED Frame bit 32, if the CKI frequency(FCKI
) to 512KHZ. The pixel number (512000-40)/32=15998, if the 50 second update Views can be connected
 in series LED number 15998/50=319. To increase the number of cascaded IC CKI frequency
(3).POLAR to empty ,R,G,B for the negative output;POLAR access VSS ,R,G,B is positive output 
(4).VEN: self-detection 
  DATA field to the middle of 3 bit is B,G,R in the MSB of the opposite phase,otherwise regarded
 as invalid data. VEN close to the empty when the self-detection; when VEN VSS then activated self-detection 
(5).CSEL to empty when the CKO and CKI,RP:CSEL connected with VSS when the CKO compared with CKI.

Application Circuit

You can download the Pdf of APA102 parameter here :

RGB+W CCT dimmable led strip

RGB+W CCT dimmable led strip

RGB+W led strip is one digital RGB alternate with one digital white color smd led, 

144LED WS2812B APA104 digital rgbw led strip

It can be apa104 RGB+W,and apa102 digital rgb and digital pure white color.
The white coloe can be white color can be warm white,nature white and white and cool white.

144LED WS2812B APA104 digital rgbw led strip

     Also it can be non built-in IC RGB+W led strip,5050 smd RGB and W led strip (not RGBW led strip), we use non build in ic ws2801,
lpd8806 to be the driver , such as ws2801 32leds 32ics ,
lpd8806 52leds 26ics , RGB+W LED STRIP include rgb chip and white chip in one flexible pcb , the ratio is 1:1. Rgb:W:RGB:W........... ,
Those led strip as same as rgb led strip can be addressable ,programmable , each led is individually.This mean those led strip not only can be white led strip 
or rgb led strip , but also rgb mix white led strip ,Compare addressable rgb led 
strip , it is very different . Rgb mix 
white color can combine a very amazing effect . It is a very good choice to use 
them to make decoration and magic color effect.



rgbw led strip